Replacing the Brake Pads on your Ford F150 is a part of the disc-brake maintenance schedule. This may ensure proper braking and operation of the brake system. Some F150 fashions come geared up with entrance and rear Brake Pads, while different fashions come with brake shoes installed on the rear wheel assemblies.

Ford F-150 Brake Pads Removal Instructions

1. Take away half the brake fluid from the brake grasp cylinder with a hand siphon pump.
2. Loosen the lugs on the wheel assembly with a lug wrench.
3. Shift the transmission to neutral.
4. Chock the wheels you’ll not be engaged on utilizing picket blocks.
5. Elevate the wheel that wants the brand new brake pads utilizing a floor jack, and safely help the automobile on a jack stand.
6. Remove the tire.
7. Unscrew the brake caliper mounting bolts from the brake rotor with a wrench or ratchet and socket.
8. Secure the caliper on the vehicle body with a bit of wire to avoid injury to the brake hose connected to the brake caliper.
9. Take away the brake pads and retaining clips by hand from the caliper bracket on prime of the brake rotor.

Ford F-150 Brake Pads Installation Instructions

1. Clean the wheel/hub assembly with brake components cleaner and a store rag.
2. Place one of the previous brake pads over the brake caliper piston, and compress the piston into its bore with a C-clamp.
3. Set up the new brake pads and new retaining clips on the brake caliper-mounting bracket by hand.
4. Mount the brake caliper over the caliper bracket and tighten the 2 caliper mounting bolts with a wrench or ratchet and socket.
5. Set the tire over the wheel/hub meeting and secure the tire with the wheel lugs.
6. Lower the vehicle.
7. Finish tightening the wheel lugs with the lug wrench.
8. Depress the brake pedal several occasions to regulate the brand new brake pads over the brake rotor.
9. Refill the brake grasp cylinder with new brake fluid till the level reaches someplace between the “Low” and “Full” marks.